Home
Shop

BluPrints Introduces a new 3 Inch Portable & Desktop Portable Printer Range

BluPrints AEM3USB and AEM3BT: A 3-inch Thermal Printer, which can print 48 characters in a single line across a receipt paper width of 3 Inches (87 mm). BluPrints Desktop encompasses a range of 2 models: POS DESKTOP ECO 3”: A USB Enabled Desktop Thermal Printer of Three Inches Width (87 mm Printer) POS PORTABLE ECO 3”: A USB and Bluetooth Enabled Wireless Portable Handheld Thermal Printer of Three Inches Width (87mm Printer)

BluPrints Bluetooth Handheld Receipt Printer to Alleviate Parking Woes in the “Mahakumbh Mela”

A confluence of divine and digital at the Kumbh from smart parking to virtual darshan, fair becomes a platform for start-ups to showcase their technologies. A parking solution is provided by one-year-old Delhi-based start-up getmyparking.com along with Aadharshila Mobility Solution’s Handheld Bluetooth enabled Receipt Printers. Using this, Parking Slips can be generated using Android Based Mobile Application provided to the Parking Attendants at the Kumbh parking areas. Pilgrims can choose their spots from 11 parking lots through a mobile app or by visiting getmyparking.com. The company provides parking details for scooters, car, buses and tractors.

BluPrints 3-inch Thermal Receipt Printer Range (AEM3BT) gets RFID Enabled

BluPrints Aadharshila’s Three Inch Thermal Receipt Printer Range Gets RF-enabled owing to the new RFID Card Reader Module released by its Engineering department in January 2016. The Two additional variants of BluPrints AEM3BT range include 1. POS DESKTOP RF 3”: A USB Enabled Desktop Thermal Printer of Three Inches Width (87 mm Printer) capable of Contactless Radio Frequency Identification (RFID) card reading. 2. POS PORTABLE RF 3”: A USB and Bluetooth Enabled Wireless Portable Handheld Thermal Printer of Three Inches Width (87mm Printer) capable of Contactless Radio Frequency Identification (RFID) card reading.

BluPrints Bluetooth Handheld Receipt Printer Range Gets “Smart” with RFID Reader

BluPrints RF – A new add-on to the existing Bluetooth Thermal Receipt Printer range; This new smart chip can read contactless Radio Frequency Identification (RFID) tags and send the tag information wirelessly over Bluetooth to a nearby Android Device.  Ideally suited to applications such as Parking on Metro Stations, BluPrints RF acts as a multi-purpose device to enable cashless transactions using the Metro Rail Card to debit the parking fee each time a commuter parks his/her vehicle at the Metro Station Parking to board a Metro Rail. In addition to reading the tag, the printer prints the parking slip wirelessly via Bluetooth through a smart Android Based Application from the mobile phone of the Metro Parking Attendant.

BluPrints Bluetooth Printers to Streamline Parking in “Krishna Pushkaralu” Festival in Andra Pradesh

The most awaited once in 12 years celebration of Krishna Pushkaralu shall be held between Aug 12 to Aug 23, 2016 on the River Krishna. The unique feature of Krishna Pushkaralu this year is that it’s technology-driven. The government machinery is making extensive use of various information and communication technology tools for effective crowd management and provision of facilities for the lakhs of pilgrims who throng the bathing ghats every day.   Aadharshila is Proud to be part of this mega event attended by 3.5 Crore devotees, as a technology partner for streamlining the Parking across 60 plus Parking lots in three districts of Andra Pradesh.    Aadharshila’s BluPrints Bluetooth Enabled Thermal Printers along with GetMyParking Android App are being used in solving Parking probems at 60+ parking lots across Vijayawada at the celebration of Krishna Pushkaralu Festival.

BluPrints Hardware Platform Gets Upgraded to CORTEX CORE M-3​

The Embedded Design Team at Aadharshila achieved a major milestone by releasing an upgraded design of its BluPrints series from ARM7 Processor Based on NXP2388 Microcontroller, to a state-of-the-art refurbished, highly optimized, futuristic, more reliable and faster Micro Controller architecture of Cortex Core M3. The new design drive was initiated at the end of previous FY, targetted for release at the end of the first quarter, in the company’s continuous efforts to optimize its hardware designs and tackle obsolescence. ​ The ARM Cortex-M3 processor is the industry-leading 32-bit processor for highly deterministic real-time applications, specifically for high-performance low-cost platforms for a broad range of devices including microcontrollers, automotive body systems, industrial control systems and wireless networking and sensors.  The new design of BluPrints series is deterministic with low latency, making it particularly applicable to real-time field applications such as Bluetooth / Handheld Thermal Portable Printers. Cortex M-3 has smaller basic core, reducing chances of failure and increasing speed. Integrated with the core are system peripherals, such as the interrupt controller, bus matrix, and an integrated sleep mode with the option of an integral eight-region Memory Protection Unit. ​ In comparison to the previous hardware base, the upgraded Electronic design offers a much superior alternative, enabling tomorrow’s embedded applications by delivering more features in the same cost range, increasing connectivity, better code reuse, and improved energy efficiency. The upgraded BluPrints hardware platform delivers outstanding computational performance and exceptional system response to events while meeting the challenges of low dynamic and static power constraints. The processor is highly configurable enabling a wide range of implementations from those requiring memory protection and powerful trace technology to cost sensitive devices requiring minimal area.  

Aadharshila Launches BluPrints “AEM2BT-48”

Aadharshila has added a new 2 Inch Printer Model with 48 Characters per line. Ideally suited for cost effective applications that require more fields printed in a single row- such as grocery bills, AadharCard no. etc, Portable Printer BluPrints “AEM2BT-48” lends immense value for space, by printing in a smaller font. Usually, 48 characters per line are printed on a three inch wide paper. However, with AEM2BT-48, users can now print more text on a two-inch paper roll itself.

BluPrints-WIFI : A New Dimension in Wireless Printing – Ethernet Enabled Wireless Portable Printer​

Aadharshila Launched BluPrints-WIFI: A best in class Ethernet enabled Portable Wireless 2 inch Thermal Printer in August 2016, following large requirements of local-area receipt generation by the Hospitality and Fine-Dining Industry, especially in European Markets, where the primary requirement is connectivity to both ANDROID and APPLE devices. The printer connects to a local Wifi Network by configuring the Network Name and Pass Key (One Time) and adds tremendous value to restaurant billing for printing of Kitchen Order Tickets in a local area across a range if 40-60m. ​ Bluprints-WIFI works in both Client Mode as an Access Point as well as  Server Mode as a Station and is capable of connecting to up to 4 Clients simultaneously as a Server. BluPrints Ideal for Online Web Applications & Mobile Point of Sale Bill / Receipt Printing Applications. Designed for compatibility with IOS and Android mobile platforms, BluPrints adds immense value to compact hand held devices enabling their usage in mobile business applications.     

BluPrints-Wifi Printer follows the 802.11 b/g/n protocol and has built in TCP/IP protocol stack for Wi-Fi Direct (P2P) as well as soft-AP. It operates on 9100 port. Based on the powerful Cortex-M3 microcontroller architecture, SCRYBE has undergone extensive research and development at the facility of AEM labs to evolve into a robust, world-class technology tool. It also has a wired (USB) option for data transfer. BluPrints-WIFI is shipped with a one-time configuation application that can connect it to the local Wifi Network (as a station), or can pair it (point-to-point) on Wifi to a Mobile device (as a server).

Kavita Aggarwal, Founder of BluPrints featured in “Your Story”

BluPrints hopes to revolutionize wireless handheld billing in India with their portable printers. BluPrints is a Noida-based startup that has launched an innovative set of wireless handheld billing solutions to enhance the speed and reliability of mobile points of sale. Founded by Kavita Aggarwal, an electronics engineer, Aadharshila Mobility Solutions was formally launched in March 2015, with a young and dynamic team of 10, comprising engineers, marketing, and customer support personnel.Read Complete coverage

Back to Top
Product has been added to your cart